Welcome to our brand new site - get in touch if you have any questions!

0

Your Cart is Empty

Shop By Tool
  • Shop by Trade / Activity
  • Frequently Asked Questions

    Yes, we supply the FXT Flexible sheets / files, with the double sided tape fitted. To order a new Perma-Grit abrasive sheet, click on the link below. Scroll down to find the size you require, and add the double sided tape option.  Fitting instructions included. https://www.permagrit.com/specials/

    Use a scalpel to lift the corner of the sheet to be removed, only 10mm.  No other knife needed.  Using long nose pliers, firmly grip this corner and rotate the pliers.  This rolls the old strip right off, just like opening a tin of spam..  (showing your age Steve)Steve says he has replaced two sheets - virtually no residue to clean off with Acetone, and no marks on the aluminium section.  He replaced both sides in 1m 30s.If you need of a job Steve, a mind stimulating job awaits!Perhaps, we should have a timed strip off and strip on competition?

    To remove glue, resin and epoxy use paint remover / solvent such as Nitromores.

    • Wear protective gloves and glasses.
    • Paint the solvent onto the contaminated area.
    • Leave for 10 - 15 minutes.
    • Scrub with a brass brush or nail brush in warm soapy water.
    • Dry thoroughly.

    Deluxe Materials have made a cleaning product for Permagrit Tools which can be purchased here.

    To remove aluminium from a rotary, try using it on ceramic or a brick. Alternatively, Heat with a blow torch and then when the aluminium starts to melt, flick to remove the liquid ali. "Wear safety glasses and gloves"

    Cleaning will change the colour of the tools, but this will not effect their performance.

    If you purchase a tool from us, that doesn't live up to your expectations. Return the tool to us, and we will give you a complete refund, or a replacement free of charge. Tracey Richardson

    United Kingdom:-

    UF Ultra Fine:- approximately equivalent 420 Grit sandpaper.
    F Fine:- approximately equivalent 320 Grit sandpaper.
    M Medium:- approximately equivalent 220 Grit sandpaper.
    C Coarse:- approximately equivalent 180 Grit sandpaper.
    XC Extra Coarse:- approximately equivalent 120 Grit sandpaper.
    XXC Extra, Extra Coarse:- approximately equivalent 80 Grit sandpaper

    USA:-
    UF Ultra Fine:- approximately equivalent 140 Grit sandpaper.
    F Fine:- approximately equivalent 120 Grit sandpaper.
    M Medium:- approximately equivalent 90 Grit sandpaper.
    C Coarse:- approximately equivalent 60 Grit sandpaper.
    XC Extra Coarse:- approximately equivalent 46 Grit sandpaper.
    XXC Extra, Extra Coarse:- approximately equivalent 24 Grit sandpaper

    Yes, we will supply longer blocks in multiples of 280mm (11”). Please email or phone for a quote.

    sales@permagrit.com Tel:- +44 (0)1529 455 034

    All Woods, Glass Fibre, Carbon Fibre, Kevlar, Perspex, Plexiglas, Lexan, Acrylics, Plastics, Laminates, MDF, Polystyrene, GRP, Composites, Carbon Fibre, Glass Fibre, Circuit board, Reinforced Plastics, Brass, Copper, Aluminium, Ceramics, Glass, Stone, Slate, Marble, Brick, Horn, Antler, Hard skin on your feet! etc.

    Our large and small rotaries we do not recommend for metal. However, if you use them on aluminium, lubricate the tool first, with either WD40 oil or chalk. This will help to stop them clogging

    The Holesaws, Reciprocating, Jigsaw, Hacksaw & Rodsaw blades are more efficient on the hardest of materials i.e. Cast Iron, Steel, fibre reinforced plastics etc